Carbatec 8" (200mm) Low Speed Bench Grinder
Carbatec 8" Grinder. Keep Your Edge Tools Sharp Without the Heat
Every keen edge starts with the right sharpening setup, and this low speed grinder is built to protect the temper of your tool steel while you work. Running at just 1,450RPM, it generates far less heat than the standard 2,800RPM bench grinder, so you avoid the blueing and temper degradation that ruins a good edge. Lower speed also means more torque, giving you steady, confident grinding through every pass.
The two 8" (200mm) aluminium oxide wheels are made specifically for HSS and other tool steels, unlike the grey wheels found on general grinders. With an 80G wheel for reshaping and a 120G wheel for sharpening, you can move straight from shaping to finishing without swapping wheels. A full 750W 1HP 4-pole high-torque motor keeps things spinning smoothly, and the flat cast alloy tool rests give you the accuracy you need to hold a consistent angle.
Key Benefits
- Protects your tool steel: the low 1,450RPM speed produces less heat, so you sharpen without blueing or losing the temper of your edge tools.
- More torque for controlled grinding: the 750W 1HP 4-pole motor delivers strong, steady power that holds its pace under load.
- Ready to sharpen out of the box: two 8" (200mm) aluminium oxide wheels (80G and 120G) let you reshape and hone tool steel without changing wheels.
- Clear visual referencing: large, clear spark guards with sturdy steel wire supports give you an accurate view of your work and a longer service life than small plastic magnifier guards.
- Accurate, safer sharpening: flat cast alloy tool rests help you hold a true angle, while the No Volt Release switch keeps the grinder from restarting after a power interruption.
Main Applications
- Sharpening chisels, plane irons and turning tools made from HSS and tool steel
- Reshaping worn or damaged edges on the coarse 80G wheel
- Refining and honing edges to a keen finish on the 120G wheel
- Building a dedicated sharpening station with matching jigs and accessories
- General edge maintenance across furniture making, turning, carving and cabinetry
As your tool collection grows, so does the need to keep every edge in top condition. The Carbatec Low Speed Grinder gives you the cooler running, control and accuracy that quality sharpening demands. Add it to your workshop today and build a powerful sharpening station around it.
Carbatec 8" Grinder. Keep Your Edge Tools Sharp Without the Heat
Every keen edge starts with the right sharpening setup, and this low speed grinder is built to protect the temper of your tool steel while you work. Running at just 1,450RPM, it generates far less heat than the standard 2,800RPM bench grinder, so you avoid the blueing and temper degradation that ruins a good edge. Lower speed also means more torque, giving you steady, confident grinding through every pass.
The two 8" (200mm) aluminium oxide wheels are made specifically for HSS and other tool steels, unlike the grey wheels found on general grinders. With an 80G wheel for reshaping and a 120G wheel for sharpening, you can move straight from shaping to finishing without swapping wheels. A full 750W 1HP 4-pole high-torque motor keeps things spinning smoothly, and the flat cast alloy tool rests give you the accuracy you need to hold a consistent angle.
Key Benefits
- Protects your tool steel: the low 1,450RPM speed produces less heat, so you sharpen without blueing or losing the temper of your edge tools.
- More torque for controlled grinding: the 750W 1HP 4-pole motor delivers strong, steady power that holds its pace under load.
- Ready to sharpen out of the box: two 8" (200mm) aluminium oxide wheels (80G and 120G) let you reshape and hone tool steel without changing wheels.
- Clear visual referencing: large, clear spark guards with sturdy steel wire supports give you an accurate view of your work and a longer service life than small plastic magnifier guards.
- Accurate, safer sharpening: flat cast alloy tool rests help you hold a true angle, while the No Volt Release switch keeps the grinder from restarting after a power interruption.
Main Applications
- Sharpening chisels, plane irons and turning tools made from HSS and tool steel
- Reshaping worn or damaged edges on the coarse 80G wheel
- Refining and honing edges to a keen finish on the 120G wheel
- Building a dedicated sharpening station with matching jigs and accessories
- General edge maintenance across furniture making, turning, carving and cabinetry
As your tool collection grows, so does the need to keep every edge in top condition. The Carbatec Low Speed Grinder gives you the cooler running, control and accuracy that quality sharpening demands. Add it to your workshop today and build a powerful sharpening station around it.
Description
Carbatec 8" Grinder. Keep Your Edge Tools Sharp Without the Heat
Every keen edge starts with the right sharpening setup, and this low speed grinder is built to protect the temper of your tool steel while you work. Running at just 1,450RPM, it generates far less heat than the standard 2,800RPM bench grinder, so you avoid the blueing and temper degradation that ruins a good edge. Lower speed also means more torque, giving you steady, confident grinding through every pass.
The two 8" (200mm) aluminium oxide wheels are made specifically for HSS and other tool steels, unlike the grey wheels found on general grinders. With an 80G wheel for reshaping and a 120G wheel for sharpening, you can move straight from shaping to finishing without swapping wheels. A full 750W 1HP 4-pole high-torque motor keeps things spinning smoothly, and the flat cast alloy tool rests give you the accuracy you need to hold a consistent angle.
Key Benefits
- Protects your tool steel: the low 1,450RPM speed produces less heat, so you sharpen without blueing or losing the temper of your edge tools.
- More torque for controlled grinding: the 750W 1HP 4-pole motor delivers strong, steady power that holds its pace under load.
- Ready to sharpen out of the box: two 8" (200mm) aluminium oxide wheels (80G and 120G) let you reshape and hone tool steel without changing wheels.
- Clear visual referencing: large, clear spark guards with sturdy steel wire supports give you an accurate view of your work and a longer service life than small plastic magnifier guards.
- Accurate, safer sharpening: flat cast alloy tool rests help you hold a true angle, while the No Volt Release switch keeps the grinder from restarting after a power interruption.
Main Applications
- Sharpening chisels, plane irons and turning tools made from HSS and tool steel
- Reshaping worn or damaged edges on the coarse 80G wheel
- Refining and honing edges to a keen finish on the 120G wheel
- Building a dedicated sharpening station with matching jigs and accessories
- General edge maintenance across furniture making, turning, carving and cabinetry
As your tool collection grows, so does the need to keep every edge in top condition. The Carbatec Low Speed Grinder gives you the cooler running, control and accuracy that quality sharpening demands. Add it to your workshop today and build a powerful sharpening station around it.
